1) Mrs. PADMAPRIYA K, " Neural network based decision support system for forecasting the power needs of electric vehicle ", Journal of Propulsion Technology, Vol. No. 45, Issue No. 3, ISSN No. 1001-4055, Aug-2024

2) Dr. S.Suganya, "Neural network based decision support system for forecasting the power needs of electric vehicle", Journal of Propulsion Technology, Vol. No. 45, Issue No. 3, ISSN No. 1001-4055, Aug-2024

3) Dr. S.Krishnapriya, "Examining foundry sand's potential as a partial substitute for m-sand through experimental and numerical research", Revista Materia, Vol. No. 29, Issue No. 3, ISSN No. 1517-7076, Jul-2024

4) Mr. A.VIGNESH MOORTHY PANDIAN, "Design and creation of pin on disc wear machine at low cost", International Journal of Creative Research Thoughts (IJCRT), Vol. No. 12, Issue No. 7, ISSN No. 2320-2882, Jul-2024

5) Dr. SARAVANA KUMAR P, "Thyroid detection using random forest algorithm", AIP , Vol. No. 3112, Issue No. 020012, ISSN No. 0094-243X, Jun-2024

6) Dr. SARAVANA KUMAR P, "Tropical cyclone prediction using visual geometry group (VGG) 16 model", AIP , Vol. No. 3112, Issue No. 020012, ISSN No. 155176160094243, Jun-2024

7) Dr. C. GAYATHRI, "Equitable irregular edge-weighting of polar grid graph and Mongolian tent graph", Proyecciones Journal of Mathematics, Vol. No. 43, Issue No. 3, ISSN No. 07160917, 07176279, May-2024

8) Dr. Jayahari Prabhu G, "Efficient Feature Extraction and Segmentation Methods used in Tuberculosis Detection” (2024) International Conference on Emerging Smart Computing and Informatics ", IEEE Xplore, Vol. No. 3, Issue No. 2, ISSN No. DOI: 10.1109/ESCI59607.2024.1049736, Apr-2024

9) Mr. C.Shanmugaraja, "Performance Analysis of a Deep Convolutional Network and a Deep Belief Network for Biometric Anomalies Detection Using fetal Ultrasound Images", International Journal of Intelligent Systems And Applications In Engineering, Vol. No. 12, Issue No. 3, ISSN No. 2147-67992, Mar-2024

10) Dr. J. Hemalatha, "Towards efficiently solving the rubik’s cube with deep reinforcement learning and recursion", E3S Web of Conferences (Scopus Indexed), Vol. No. 491, Issue No. 01009, ISSN No. 2267-1242, Feb-2024

11) Dr. J. Hemalatha, "The Impact of Denoising in Watermarking Robustness", Multimedia Watermarking, Springer, Singapore, Vol. No. 1, Issue No. 1, ISSN No. 978-981-99-9803-6, Feb-2024

12) Dr. J. Hemalatha, " Contemporary Improvements in Enhancing the Watermarking Techniques: A Deep Perspective", Multimedia Watermarking, Springer, Singapore, Vol. No. 1, Issue No. 1, ISSN No. 978-981-99-9803-6, Feb-2024

13) Mr. P. Nirmal Kumar, "Enhancing grid-connected solar PV systems with a novel three-phase hybrid multilevel inverter", International Journal of Circuit Theory & its Applications, Vol. No. 52, Issue No. 9, ISSN No. 1097-007X, Feb-2024

14) Mr. M.Karthikeyan, "Development of superhydrophobic surface on mild steel by a facile approach and analyzing its self-cleaning and anti-freezing properties", Results in Surfaces and Interfaces, Vol. No. 14, Issue No. 1, ISSN No. 2666-8459, Feb-2024

15) Mr. BALAMURUGAN S, "Development of superhydrophobic surface on mild steel by a facile approach and analyzing its self-cleaning and anti-freezing properties", Results in Surfaces and Interfaces, Vol. No. 14, Issue No. 1, ISSN No. 2666-8459, Feb-2024

16) Dr. Jayahari Prabhu G, "performance analysis of single and multiple pumps usage in water distribution systems using two timer relay and differential pressure switch", IEEE Xplore, Vol. No. 01, Issue No. 04, ISSN No. 10.1109/ICAEECI58247.2023.10370964, Jan-2024

17) Mr. A.VIGNESH MOORTHY PANDIAN, " Impact of mechanical engineering innovations in biomedical advancements", Springer, Vol. No. 3, Issue No. 1, ISSN No. 2731-3441, Jan-2024

18) Dr. S. Suguna , "Quinoline scaffolds as fluorescent symmetric dipodal molecular cleft for swift and efficient Ag+ ion detection: Applications in real samples and bioimaging", Journal of Photochemistry and Photobiology A: Chemistry, Vol. No. 447, Issue No. 115226, ISSN No. 1010-6030, Jan-2024

19) Dr. S.Suganya, "Impact evaluation of different Plug-in Electric Vehicles emission using precise pricing scheme", Journal of Propulsion Technology, Vol. No. 44, Issue No. 6, ISSN No. 1001-4055, Dec-2023

20) Mr. MUTHU ESHWARAN R, "Energy Monitoring for Renewable Energy System Using Machine Learning Algorithms", Recent Advances in Electrical & Electronic Engineering, BENTHAM SCIENCE, Vol. No. 16, Issue No. 0, ISSN No. ISSN 2352-0965, Oct-2023

21) Mr. A.VIGNESH MOORTHY PANDIAN, "Experimental and finite element analysis on the effect of pores on bio-printed polycaprolactone bone scaffolds", Bioprinting, Elsevier, Vol. No. 34, Issue No. 1, ISSN No. 2405-8866, Oct-2023

22) Dr. P.S.R.Senthil Maharaj , "Experimental and finite element analysis on the effect of pores on bio-printed polycaprolactone bone scaffolds", Bioprinting, Vol. No. 34, Issue No. 1, ISSN No. 2405-8866, Oct-2023

23) Dr. P. Elamparithi, "A Machine Learning Approach for Detecting DDOS Attack in IoT Network using Random Forest Classifier", International Journal of Intelligent Systems and Applications in Engineering, Vol. No. 12, Issue No. 2, ISSN No. 2147-6799, Sep-2023

24) Mr. P. Nirmal Kumar, "Modelling and performance analysis of improved incremental conductance MPPT technique for water pumping system", Measurement: Sensors, Vol. No. 30, Issue No. 1, ISSN No. 2665-9174, Sep-2023

25) Dr. Palraj K, "Smart AI Based Automatic number plate detection", Journal For Basic Sciences, Vol. No. 23, Issue No. 4, ISSN No. 1006-8341, Apr-2023

26) Dr. M.Ramuvel, "Assessment of physical and chemical water quality parameters using naive bayes control algorithm", Materials today Proceedings , Vol. No. 80, Issue No. 2, ISSN No. 2214-7853, Apr-2023

27) Dr. SARAVANA KUMAR P, "Automatic Recognition of Speaker Labels Using CNN-SVM Scheme", Springer Nature, Vol. No. 703, Issue No. 1, ISSN No. 23673389 23673370, Mar-2023

28) Dr. P.S.R.Senthil Maharaj , "An investigation on mechanical properties of 3D pen fused zones for additive manufactured parts", Engineering Solid Mechanics, Vol. No. 11, Issue No. 3, ISSN No. 2291-8744 , Mar-2023

29) Dr. M.KALIRAJ, "Study of mechanical property of treated teak wood and tamarind seed particles in the applications of reinforced composites", materials today proceedings, Vol. No. 436, Issue No. 03, ISSN No. 22147853, Mar-2023

30) Dr. P.SEENI KANNAN, "An investigation on mechanical properties of 3D pen fused zones for additive manufactured parts ", Engineering Solid Mechanics, Vol. No. 11, Issue No. 1, ISSN No. 263-27, Mar-2023

31) Mrs. R.Anandhalakshmi, "Treatment of Wastewater Using Garlic Extract as Natural Coagulant and Coconut Shell as Medium", European Chemical Bulletin, Vol. No. 202312525152525, Issue No. 25152525, ISSN No. ISSN 2063-5346 , Feb-2023

32) Dr. Jayahari Prabhu G, "Building and Monitoring a Smart System by using IoT Technology", IEEE Xplore, Vol. No. 10, Issue No. 04, ISSN No. 978-1-6654-8271-4/22, Jan-2023

33) Dr. Meby Selvaraj, "A review of process parameters in friction drilling on joining of steels", Archives of Materials Science and Engineering, Vol. No. 119, Issue No. 1, ISSN No. 12-20, Jan-2023

34) Mr. PAKIYA PRADEEP, "Combustion and emission characteristics of diesel engine fuelled with waste plastic oil – a review.", International Journal of Ambient Energy, Vol. No. 43, Issue No. 1, ISSN No. 21628246, Dec-2022

35) Dr. R B JEEN ROBERT, "Comprehensive review on lanthanum based thermal barrier coating materials for high temperature applications", Materials Today: Proceedings, Vol. No. 68, Issue No. 5, ISSN No. 2214-7853, Oct-2022

36) Dr. P.S.R.Senthil Maharaj , "In situ bio printing of carbon fiber reinforced PEEK hip implant stem", AIP Conference Proceedings, Vol. No. 2653, Issue No. 1, ISSN No. 1678-4324, Oct-2022

37) Mrs. M.Maheswari, "A Novel metaheuristic approach for control of SEPIC converter in a standalone PV system", International Journal of Power Electronics and Drives Systems, Vol. No. 13, Issue No. 2, ISSN No. 2088-8694, Jun-2022

38) Mrs. B.Sarojini, "A novel Metaheuristic approach for control of SEPIC Converter in a standalone PV system", International Journal of Power Electronics and Drives Systems, Vol. No. 13, Issue No. 2, ISSN No. 2088 - 8694, Jun-2022

39) Dr. M.Meenakshi Devi, "Placement technique of PMU by including VSI", Dickensian Journal, Vol. No. 22, Issue No. 6, ISSN No. 0012-2440, Jun-2022

40) Dr. Palraj K, "An automatic brain tumor size measurement method for MRI", AICTE SPONSORED NATIONAL ONLINE CONFERENCE ON DATA SCIENCE AND INTELLIGENT INFORMATION TECHNOLOGY, Vol. No. 2444, Issue No. 1, ISSN No. https://doi.org/10.1063/5.0078330, Mar-2022

41) Dr. Jayahari Prabhu G, "“A NOVEL APPROACH ON MEDICAL IMAGING DATA SECURITY OPERATION BASED ON HONEY ALGORITHM”", Ingeniería y Tecnología, Vol. No. 01, Issue No. 01, ISSN No. 978-84-124943-4-1, Mar-2022

42) Mr. T.Thirukumaran , "Railway Track Crack identification using IoT based Sensor ", Mukt Shabd Journal , Vol. No. 11, Issue No. 1, ISSN No. 2347-3150, Feb-2022

43) Mr. M. S. Kalyana Sundaram, "FUZZY CORNER METRIC BASED BRAIN TUMOR SEGMENTATION AND GRADE CLASSIFICATION", Journal of Physics: Conference Series, Vol. No. 1947, Issue No. 1, ISSN No. 1742-6596, Oct-2021

44) Dr. Meby Selvaraj, "Influence of processing conditions and issues in Machining of aluminum metal matrix composites", Materials Today: Proceedings, Vol. No. 47, Issue No. 19, ISSN No. 7035-7040, Jun-2021

45) Dr. C. Senthil Kumar, "Performance Improvement of Standalone PV system by Full bridge LLC Resonant Converter", Psychology and Education, Vol. No. 57, Issue No. 9, ISSN No. 00333077, Feb-2021

46) Dr. THENMOEZHI.N, "Multiple Input and output for OFDM for visible Light Communication", Journal of Physics: Conference Series, Vol. No. 1717, Issue No. 1, ISSN No. 1742-6596, Jan-2021

47) Dr. Meby Selvaraj, "Experimental determination of the effect of change in relative roughness pitch on the thermo-hydraulic performance of air heater working with solar energy", Materials Today: Proceedings, Vol. No. 46, Issue No. 20, ISSN No. 10668-10671, Jan-2021

48) Dr. J. Sutha, "Pectoral Muscle Segmentation in Mammograms", Biomedical and Pharmacology , Vol. No. 13, Issue No. 3, ISSN No. 0974-6242, Sep-2020

49) Dr. P.SEENI KANNAN, "Performance and emission characteristics of a DI diesel engine using diestrol blends and diesel as fuel", International Journal of Enterprise Network Management, Vol. No. 10, Issue No. 2, ISSN No. 1, Jul-2020

50) Dr. R. Pon Vengatesh , "Investigation on synthesis of SnO2 nanoparticles using sol–gel process for energy storage application", Australian Journal of Electrical & Electronics Engineering- Taylor & Francis publication, Vol. No. 1, Issue No. 1, ISSN No. 1448837X, Jun-2020

51) Dr. R. Pon Vengatesh , "Investigation on synthesis of SnO2 nanoparticles using sol–gel process for energy storage application", Australian Journal of Electrical & Electronics Engineering- Taylor & Francis publication, Vol. No. 17, Issue No. 2, ISSN No. 1448837X, Jun-2020

52) Mrs. G.Subhashini, "Comparative Analysis of Full-Adder Using Conventional XNOR and NEO-XNOR Logic ", Journal of Electronic Design Engineering, Vol. No. 6, Issue No. 1, ISSN No. 2581-639X, May-2020

53) Dr. C. Karuppasamy , "A Review on Deregulation of Power System", Wutan Huatan Jisuan Jishu, Vol. No. 16, Issue No. 5, ISSN No. 1001-1749, May-2020

54) Dr. S. Saravanan, "A REVIEW ON DEREGULATION OF POWER SYSTEM", Wutan Huatan Jisuan Jishu, Vol. No. 16, Issue No. 5, ISSN No. 1001-1749, May-2020

55) Mr. Prabhu R, "Cloud Computing: An Effective Retrieval and Task Scheduling on Data Storage in Security and Privacy", Mat Journals on Computer based Parallel Programming, Vol. No. 5, Issue No. 1, ISSN No. 2582-2179, Apr-2020

56) Dr. S.Madhavapandian, "FPGA implementation of highly scalable AES algorithm using modified mix column with gate replacement technique for security application in TCP/IP", Microprocessors and Microsystems, Vol. No. 73, Issue No. 0, ISSN No. 0141-9331, Mar-2020

57) Dr. THENMOEZHI.N, "Image Fusion Based Multimodal Bio Metric Recogonition", Journal of Critical reviews, Vol. No. 7, Issue No. 4, ISSN No. 2394-5125, Mar-2020

58) Dr. P.SEENI KANNAN, "Performance, Emission, and Combustion Characteristics of a direct injection Diesel engine using blends of Punnai oil Biodiesel and Diesel as fuel", THERMAL SCIENCE,, Vol. No. 24, Issue No. 1, ISSN No. 1, Mar-2020

59) Dr. P. Elamparithi, "MRI Brain Tumor Segmentation based on Fish Chaining Transition Optimization Algorithm", comptes rendus de l'académie bulgare des sciences, Vol. No. 73, Issue No. 2, ISSN No. 1310-1331, Feb-2020

60) Mr. PAKIYA PRADEEP, "Experimental Investigation on Performance and Emission Characteristics of Diesel Lean Burn HCCI Engines", International Journal of Vehicle Structures & Systems, Vol. No. 12, Issue No. 1, ISSN No. 0975-3060, Jan-2020

61) Mrs. G.Subhashini, "IOT based Temperature Monitoring System using FPGA", Journal of Analog and Digital Devices, Vol. No. 6, Issue No. 2, ISSN No. 35584-31, Nov-2019

62) Dr. C. Senthil Kumar, "Design of Standalone PV system", International Journal of Scientific & Technology Research, Vol. No. 8, Issue No. 11, ISSN No. 2277-8616, Nov-2019

63) Mr. BALAMURUGAN S, "Investigation of Thermal Shock Resistance of CeO2 Coating on Titanium Alloy by Magnetron Sputtering", SAE Technical Paper, SAE International, Vol. No. 28, Issue No. 0103, ISSN No. 0148-7191, Oct-2019

64) Dr. P.S.Satheesh Kumar, "Physical properties of rare earth metal (Gd3+) doped SnO2 thin films prepared by simplified spray pyrolysis technique using Nebulizer", Optik: International Journal for Light and Electron Optics, Vol. No. 194, Issue No. 2019, ISSN No. 0030-4026, Oct-2019

65) Dr. R. Pon Vengatesh , "An intelligent approach for dynamic load frequency control with hybrid energy storage system", Australian Journal of Electrical and Electronics Engineering, Taylor & Francis, Vol. No. 16, Issue No. 4, ISSN No. 1448837X, Aug-2019

66) Dr. Meby Selvaraj, "Finite element approach in thermal modelling of friction stud welding", AIP Conference Proceedings, Vol. No. 2142, Issue No. 1, ISSN No. 1551-7616, Aug-2019

67) Dr. J. Sutha, "A simple multi-feature based stereoscopic medical image retrieval system", The Journal of Polish Society of Medical Physics, Vol. No. 25, Issue No. 2, ISSN No. 1898-0309, Jun-2019

68) Mr. BALAMURUGAN S, "Braking Force & Braking Time Reduction by using Four Shoe Brake System", International Journal of Innovative Technology and Exploring Engineering, Vol. No. 8, Issue No. 6, ISSN No. 2278-3075, Apr-2019

69) Mr. BALAMURUGAN S, "Corrosion Inhibition of Mild Steel by using Banana Peel Extract", International Journal of Innovative Technology and Exploring Engineering, Vol. No. 8, Issue No. 6, ISSN No. 2278-3075, Apr-2019

70) Mr. Prabhu R, "A Cloud Computing;A Effective Retrieval for Data Storage and Security", International Journal of Engineering and Technology, Vol. No. 3, Issue No. 1, ISSN No. 2249-8958, Feb-2019

71) Dr. C. Senthil Kumar, "A comparative study of universal fuzzy logic and PI speed controllers for four switch BLDC motor drive", International Journal of Power Electronics , Vol. No. 10, Issue No. 1, ISSN No. 1756-6398, Jan-2019

72) Mr. BALAMURUGAN S, "Weight reduction of motorcycle frame by topology optimization", Journal of Achievements in Materials and Manufacturing Engineering, Vol. No. 2, Issue No. 91, ISSN No. 1734-8412, Dec-2018

73) Mr. BALAMURUGAN S, "A study on magnetic field assisted laser percussion drilling and its effect on surface integrity", Archives of Materials Science and Engineering, Vol. No. 1, Issue No. 94, ISSN No. 1897-2764, Nov-2018

74) Mr. Prabhu R, "Symmetric Searchable Encryption and Data Retrieval in Cloud Computing", International Journal on Electronics and Communication Engineering, Vol. No. 6, Issue No. 3, ISSN No. 2393-9028, Sep-2018

75) Dr. P.S.Satheesh Kumar, "Effect of Substrate Temperature on Physical Properties of Nebulized Spray Deposited SnS Thin Films", Journal of Applied Science and Computations, Vol. No. 05, Issue No. 09, ISSN No. 1076-5131, Sep-2018

76) Dr. P.S.Satheesh Kumar, "Physical properties of nebulized spray pyrolysised SnO2 thin films at different substrate temperature", Applied Physics A, Vol. No. 124, Issue No. 643, ISSN No. 0947-8396, Aug-2018

77) Dr. P.S.Satheesh Kumar, "Volume of precursor solution effect on the properties of SnO2 thin films prepared by nebulized spray pyrolysis technique", Optical and Quantum Electronics, Vol. No. 50, Issue No. 346, ISSN No. 0306-8919, Aug-2018

78) Dr. P.S.Satheesh Kumar, "Effects of Precursor Concentration on the Structural, Optical and Electrical Properties of Nebulized Spray Pyrolysis SnS Thin Films", Journal of Applied Science and Computations, Vol. No. 05, Issue No. 08, ISSN No. 1076-5131, Aug-2018

79) Dr. P.S.Satheesh Kumar, "Studies On Synthesis And Characterization Of Cd3xIn2-2xS3 Alloy Thin Films By Nebulized Spray Pyrolysis Technique", Journal of Applied Science and Computations, Vol. No. 05, Issue No. 08, ISSN No. 1076-5131, Aug-2018

80) Dr. P.SEENI KANNAN, "Heat Transfer Enhancement Nano Fluids in a Car Radiator", Materials and technology, Vol. No. 52, Issue No. 4, ISSN No. 1580-2949, Jun-2018

81) Mrs. PADMAPRIYA K, "ARM based obstacle avoiding vacuum cleaner Robot", IJARTET, Vol. No. 5, Issue No. 112, ISSN No. 231, Mar-2018

82) Dr. Meby Selvaraj, "Assesment of influncing factors on mechanical and electrical properties of Al/Cu joints", American Institute of Physics, Vol. No. 1953, Issue No. 1, ISSN No. 978-0-7354-1648-2, Mar-2018

83) Dr. G.VAIRAMUTHU, "Experimental and Artificial Neural Network based prediction of performance and emission characteristics of DI diesel engine using Calophyllum inophyllum methyl ester at different Nozzle Opening Pressure", Heat and Mass Transfer, Vol. No. 54, Issue No. 1, ISSN No. 0947- 7411, Jan-2018

84) Dr. P.SEENI KANNAN, "Performance Analysis of VCR Engine fueled with Neem Oil and Various Spices Using Anova Technique", Journal of the Chinese Society of Mechanical Engineers, Vol. No. 39, Issue No. 3, ISSN No. 0257-9731, Jan-2018

85) Dr. J. Sutha, "Design of fault tolerance environment in optical networks", Int. J. Biomedical Engineering and Technology, Vol. No. 25, Issue No. 2, ISSN No. 0, Dec-2017

86) Dr. P.SEENI KANNAN, "Measurement and Control of Emissions from Diesel Engine Operated by Biodiesel with Bio additives of Mentha piperita", Measurement and Control, Vol. No. 50, Issue No. 2, ISSN No. 0020-2940, Apr-2017

87) Dr. R. Pon Vengatesh , "Evolutionary optimization approach for finding GPPP of a PV array system under Heterogeneous operating condition", Journal of Electrical Engineering, Vol. No. 1, Issue No. 1, ISSN No. 15824594, Mar-2017

88) Dr. Meby Selvaraj, "Optimisation of cutting parameters in CNC turning of EN-19 using tungsten carbide", Int. J. Computer Aided Engineering and Technology, Vol. No. 9, Issue No. 2, ISSN No. 17572657, 17572665, Mar-2017

89) Dr. Meby Selvaraj, "Optimisation of swept angles for airfoil NACA 6-series", Int. J. Computer Aided Engineering and Technology, Vol. No. 9, Issue No. 2, ISSN No. 17572657, 17572665, Mar-2017

90) Dr. P.SEENI KANNAN, "Optimization of transesterification of biodiesel using green catalyst derived from Albizia Lebbeck Pods by mixture design", Renewable Energy, Vol. No. 104, Issue No. 1, ISSN No. 0960-1481, Mar-2017

91) Mrs. G.Subhashini, "Analytical modeling and characterization of TSV for three dimensional integrated circuits", World Scientific and Engineering Academic and Society, Vol. No. 3, Issue No. 3, ISSN No. 2234-1X, Feb-2017

92) Dr. P.SEENI KANNAN, "Effect of Nano Silver on Microstructure, Mechanical and Tribological Properties of Cast Aluminum 6061 Alloy", Transactions of Nonferrous Metals Society of China, Vol. No. 27, Issue No. 1, ISSN No. 1003-6326, Jan-2017

93) Mr. Prabhu R, "Rights Protection for Relational Data Using Least Significant Bit Method", Mat Journals of Data Mining and Management, Vol. No. 1, Issue No. 3, ISSN No. -, Dec-2016

94) Dr. P.SEENI KANNAN, "Effects of Moisture Content and Die Pressure of Artocarphus Heterophyllus Leaves Powder Biomass Processing by using Response Surface methodology", Asian Journal of Research in Social Sciences and Humanities, Vol. No. 6, Issue No. 12, ISSN No. 2249-7315, Dec-2016

95) Dr. P.SEENI KANNAN, "Experimental and CFD simulation analysis of microchannel heat exchanger to improve the pressure drop and heat transfer characteristics using R410A", International Journal of Advanced Engineering Technology, Vol. No. 7, Issue No. 2, ISSN No. 2456-7655, Sep-2016

96) Dr. P.SEENI KANNAN, "Effect of additives on low emission characteristics of a DI CI engine fueled with rubber seed biodiesel", International Journal of Advanced Engineering Technology, Vol. No. 7, Issue No. 2, ISSN No. 0976-3945, Jun-2016

97) Dr. P. Elamparithi, "An Innovative approach of EM Algorithm for Restoration of Noisy Video Frame Images in a Video Sequence", International Journal of Innovation and Scientific Research, Vol. No. 23, Issue No. 2, ISSN No. 2351-8014, May-2016

98) Dr. P.SEENI KANNAN, "Exhaust Measurement and Emission Control – Biodiesel Involvement in Diesel Engine", AUTOMATIKA, Vol. No. 57, Issue No. 2, ISSN No. 1848-3380, Mar-2016

99) Dr. P.SEENI KANNAN, "Al6061 Hybrid Metal Matrix Composite Reinforced with Alumina and Molybdenum Disulphide", Advances in Materials Science and Engineering, Vol. No. 1, Issue No. 0, ISSN No. 1687-8442, Mar-2016

100) Dr. P.SEENI KANNAN, "Experimental Analysis of Solar Still using different Thermal Energy Storage Materials", Asian Journal of Research in Social Sciences and Humanities, Vol. No. 6, Issue No. 10, ISSN No. 2249-7315, Jan-2016

101) Dr. P.SEENI KANNAN, "Exhaust Emission and Performance Analysis on Diesel Engine – Biofuel (RSO) and its Diesel Blends", Journal of Engineering Research & Technology, Vol. No. 1, Issue No. 1, ISSN No. 2278-0181, Jan-2016

102) Dr. P.SEENI KANNAN, "Global Impact and Gaseous Emissions of Ethanol Bio-Diesel Blended Fuel in Diesel Engine", Engine’ International Journal of Applied Engineering Research, Vol. No. 10, Issue No. 28, ISSN No. 0973-4562 , Dec-2015

103) Dr. P.SEENI KANNAN, "Effects of Moisture Content and Die Pressure on Artocarpus Heterophyllus Leaves Powder Biomass Processing", International Journal of Applied Engineering Research, Vol. No. 10, Issue No. 8, ISSN No. 0973-4562, Aug-2015

104) Dr. P.SEENI KANNAN, "Global Impact and Gaseous Emissions of Ethanol Bio-Diesel Blended Fuel in Diesel Engine", International Journal of Applied Engineering Research, Vol. No. 10, Issue No. 28, ISSN No. 0973-4562, Aug-2015

105) Dr. P.SEENI KANNAN, "Measuring and Controlling the Exhaust Emission from DI Diesel Engine Using Biofuel as an Environment Fuel", Measurement and Control, DOI:10.1177/0020294014565636, Vol. No. 48, Issue No. 10, ISSN No. 0020-2940 , Jul-2015

106) Mrs. G.Subhashini, "Power-delay Co-analysis of TSV for three dimensional integrated circuits", CIIT International Journal of Programmable Device Circuits and Systems, Vol. No. 4, Issue No. 3, ISSN No. 2204-2, May-2015

107) Dr. P.SEENI KANNAN, "Experimental Investigation on Emission Characteristics of Variable Compression Ratio CI Engine Fuelled by Combined Biodiesel", Asian Journal of Research in Social Sciences and Humanities, Vol. No. 6, Issue No. 9, ISSN No. 2249-7315 , Apr-2015

108) Dr. P.SEENI KANNAN, "Densification Characteristics and Mechanical Behavior of Artocarphus Heterophyllus Leaves Powder", Asian Journal of Research In Social Sciences And Humanities, Vol. No. 6, Issue No. 9, ISSN No. 2249-7315, Apr-2015

109) Dr. P.SEENI KANNAN, "Performance Analysis of Solar Still Using Cowdung Cakes Mixed With Coirpith", International Journal of Applied Engineering Research , Vol. No. 10, Issue No. 19, ISSN No. 0973-4562, Mar-2015

110) Dr. P.SEENI KANNAN, "Performance Analysis of Solar Still using Cowdung Cakes Mixed with Coirpith", International Journal of Applied Engineering Research , Vol. No. 10, Issue No. 19, ISSN No. 0973-4562 , Mar-2015

111) Dr. P.SEENI KANNAN, "Thermal Analysis of Exhaust Waste Heat Recovery From Diesel Engines", International Journal of Applied Engineering Research, Vol. No. 9, Issue No. 26, ISSN No. 0973-4562, Oct-2014

112) Dr. P.SEENI KANNAN, "Optimization of Mchx using CFD and Refrigeration cycle simulator", Advanced materials Research, Vol. No. 984, Issue No. 1, ISSN No. 1662-8985, Aug-2014

113) Dr. P.SEENI KANNAN, "Biofuel (Cooking Oil) Blends Contribution in DI Diesel Engine – Performance & Emission Study", Advanced Materials Research, Vol. No. 984, Issue No. 1, ISSN No. 1662-8985, Aug-2014

114) Dr. P.SEENI KANNAN, "Experimental Investigation Of Performance and Emission Of Single Cylinder diesel Engine Operating on Diesel Blended with Nano Particles", International Review of Mechanical Engineering, Vol. No. 8, Issue No. 4, ISSN No. 1970-8734, Jul-2014

115) Dr. P.SEENI KANNAN, "A Finite element method based analysis of casting solidification on permanent metallic models", Pensee Journal, Vol. No. 76, Issue No. 1, ISSN No. 0031-4773, Jan-2014

116) Dr. R. Pon Vengatesh , "Investigation of High Frequency Lossless Step-up DC-DC Switching Converter Employing Electronic PI Controller", Journal of Electrical Engineering, Vol. No. 13, Issue No. 4, ISSN No. 15824594, Dec-2013

117) Dr. P.SEENI KANNAN, "Investigational Study and Manage the Poisonous Emissions in IC Engines by Nano Materials", Life Science Journal, Vol. No. 10, Issue No. 3, ISSN No. 1097-8135, Oct-2013

118) Dr. P.SEENI KANNAN, "Case Study of Emission Reduction from a Mobile Vehicle Fuelled with Vegetable Oil", Research Journal of Applied Sciences, Engineering and Technology, Vol. No. 6, Issue No. 15, ISSN No. 2040-7459, Jun-2013

119) Dr. P.SEENI KANNAN, "Experimental Studies on Performance and Emission Analysis in Diesel Engine Using Bio-Fuel (Neem Oil)", Advanced Materials Research, Vol. No. 768, Issue No. 1, ISSN No. 1662-8985, Jun-2013

120) Dr. P.SEENI KANNAN, "Bio Fuel Strategies in India – Fundamental Study", International Journal of Engineering Science & Research Technology, Vol. No. 2, Issue No. 1, ISSN No. 2277-9655, Jun-2013

121) Dr. P.SEENI KANNAN, "Experimental Analysis of Energy Recovery from an Internal Combustion Engine Exhaust using Rankine cycle, Advanced Materials Research ", Trans Tech Publications, Switzerland , Vol. No. 768, Issue No. 1, ISSN No. doi:10.4028/www.scientific.net/AMR.768.158, Feb-2013

122) Dr. P.SEENI KANNAN, "Study On Waste Heat Recovery In An Internal Combustion Engine", International Journal of Engineering Research & Technology , Vol. No. 1, Issue No. 10, ISSN No. 2278-0181 , Dec-2012

123) Dr. P.SEENI KANNAN, "Numerical Simulation of Casting Solidification by Boundary Element method", International Review of Mechanical Engineering , Vol. No. 6, Issue No. 6, ISSN No. 1970-8734 , Sep-2012

124) Dr. P.SEENI KANNAN, "Recent Trends and Applications of Bio Diesel", International Journal of Engineering Research and Applications, Vol. No. 2, Issue No. 6, ISSN No. 2248-9622, Aug-2012

125) Dr. P.SEENI KANNAN, "A Study of Emission Reduction from A Light Duty Vehicle Fuelled With Biofuel (Vegetable Oil)", National Journal of Advances in Building Sciences and Mechanics, Vol. No. 3, Issue No. 2, ISSN No. 0975-7317, Jan-2012

126) Dr. P.SEENI KANNAN, "An experimental Analysis of a Y section exhaust manifold system with improved engine performance", International Journal of Product Development, Vol. No. 6, Issue No. 6, ISSN No. 1477-9056, Jun-2008

127) Dr. P.SEENI KANNAN, "A Design Strategy for six Cylinder Stationary Diesel Engine Exhaust Systems", International Journal of Mechanical Engineering, Slovakia, Vol. No. 59, Issue No. 1, ISSN No. 0039-2472, May-2008

128) Dr. P.SEENI KANNAN, "Modeling and Simulation Design of a Modified y-section exhaust manifold to improve transient performance of a low-speed six cylinder diesel engine", International ICFAI Journal of Science and Technology, Vol. No. 4, Issue No. 1, ISSN No. 0973-2268, Apr-2008

129) Dr. P.SEENI KANNAN, "Simulation of the multicylinder stationary diesel engine and its validity under transient engine operation including newly developed exhaust system", International Engineering Technology Journal of Mechanical Design, Vol. No. 1, Issue No. 1, ISSN No. 1546-9239, Dec-2007

130) Dr. P.SEENI KANNAN, "A design strategy for Volumetric Efficiency Improvement in a Multi cylinder Stationary Diesel Engine and its Validity under Transient engine operation", International American Journal of Applied Sciences, Vol. No. 5, Issue No. 3, ISSN No. 1546-9239, Oct-2007

1) Dr. M.Ramuvel, "Enhancing energy and exergy efficiencies in smart grid integration with a hybrid DHO-MACNN technique for photovoltaic system", International Journal of Exergy, Vol. No. 45, Issue No. 1, ISSN No. 1742-8297, Oct-2024(Impact Factor: 1.1)

2) Dr. R.Vandhiyan, "Optimizing Lime Mortar Performance: A Comprehensive Study on Mechanical and Durability Improvements with Palm Jaggery and Gallnuts", JOM, Vol. No. 76, Issue No. 11, ISSN No. 1543-1851, Oct-2024(Impact Factor: 2.5)

3) Dr. M.KALIRAJ, "A Comprehensive overview of the Fabrication and Testing Methods of FRP Composite Pipes", MethodsX, Vol. No. 13, Issue No. 102990, ISSN No. 2215-0161, Oct-2024(Impact Factor: 1.6)

4) Mr. A.VIGNESH MOORTHY PANDIAN, "Enhanced Mechanical and Thermal Properties in Epoxy- Based Glass Fabric Composites via Nano Silica Integeration", Polymer-Plastics Technology and Materials, Taylor and Francis, Vol. No. 63, Issue No. 1, ISSN No. -, Aug-2024(Impact Factor: 2.6)

5) Mr. M.NAGENDRAN, "Enhanced Mechanical and Thermal Properties in Epoxy- Based Glass Fabric Composites via Nano Silica Integeration", Polymer-Plastics Technology and Materials, Taylor and Francis, Vol. No. 63, Issue No. 1, ISSN No. -, Aug-2024(Impact Factor: 2.6)

6) Dr. R.Selvabharathi, "Influence of microstructure and tribology properties on deep-dipping coating method of sappanwood (SW)/ polyvinyl alcohol (PVA)/ Polyethylene (PE)/ Aluminium nitride (AlN) natural fiber nanocomposite materials", Journal of Polymer Research, Vol. No. 31, Issue No. 10, ISSN No. 1022-9760, Jul-2024(Impact Factor: 2.6)

7) Mr. MUTHU ESHWARAN R, "Comparative investigation of imaging techniques, pre-processing and visual fault diagnosis using artificial intelligence models for solar photovoltaic system–A comprehensive review.", MEASUREMENT, Vol. No. 232, Issue No. 0, ISSN No. ISSN 0263-2241, Jun-2024(Impact Factor: 5.6)

8) Dr. R.Selvabharathi, "Effect on Ti/Mg isothermal oxidation of refinement microstructure and tribological behaviour of pure aluminium alloy by plasma spray coating", The Journal of Nanomaterials, Nanoengineering and Nanosystems , Vol. No. 238, Issue No. 2, ISSN No. 2397-7914, Jun-2024(Impact Factor: 4.2)

9) Dr. P.S.R.Senthil Maharaj , "A novel carbon-flax bioepoxy hybrid composite bone plate with enhanced bio-mechanical performance", Materialwiss. Werkstofftech, Vol. No. 55, Issue No. 1, ISSN No. 0933-5137, May-2024(Impact Factor: 1.2)

10) Dr. P.S.R.Senthil Maharaj , "Cutting-edge tool wear monitoring in AISI4140 steel hard turning using least square-support vector machine", Journal of the Chinese Institute of Engineers , Vol. No. 47, Issue No. 5, ISSN No. 0253-3839, May-2024(Impact Factor: 1)

11) Mr. MUTHU ESHWARAN R, "Harnessing the Potential of Bellamya eburnea Shell-Derived Nanoparticles Through Electro-mechanical Optimization in the Performance of PCL Bio-composites: A Green Insulation Revolution.", WASTE AND BIOMASS VALORIZATION, Vol. No. 15, Issue No. 4, ISSN No. ISSN 1877-2641, Apr-2024(Impact Factor: 3.5)

12) Dr. PADMANABAN B, "Growth, investigation of calcium D‐gluconate monohydrate‐CDG crystals with shocked impact for electronic usage and the pure crystal for sensor application", Springer, Vol. No. 10, Issue No. 08, ISSN No. (2024) 35:832, Apr-2024(Impact Factor: 2.58)

13) Dr. R.Selvabharathi, "Enhanced interlaminar structure and dynamic mechanical properties of Tectona grandis fiber (TGF)/polypropylene fiber (PPF)/carbon nanotube (CNT) nano composite prepared solid dipping coating process", Journal journal of polymer engineering, Vol. No. 44, Issue No. 6, ISSN No. 0334-6447, Apr-2024(Impact Factor: 3.7)

14) Dr. J. Dharmaraja, "A review on homogeneous and heterogeneous catalytic microalgal lipid extraction and transesterification for biofuel production", Chinese Journal of Catalysis, Vol. No. 59, Issue No. 4, ISSN No. 0253-9837, Apr-2024(Impact Factor: 16.5)

15) Dr. THENMOEZHI.N, "Multiview Image Fusion Using Ensemble Deep Learning Algorithm for CT and MRI Images", ACM Transactions on Asian and Low resource Language Information Processing, Vol. No. 23, Issue No. 3, ISSN No. 2375-4699, Mar-2024(Impact Factor: 2)

16) Mrs. V.Chandra, "Low Complexity Energy Disaggregation Algorithm for Non - Intrusive Load Monitoring", Electric Power Components and Systems – Taylor & Francis, Vol. No. 0, Issue No. 0, ISSN No. ISSN: 1532-5008 print / 1532-5016 online , Mar-2024(Impact Factor: 2.7)

17) Dr. M.P.Indira Devi , "Effects of Process Parameters on vibrational Behaviour of sansevieria cylindrica fiber Reinforced Polyester Composites", Journal of biobased materials and bio Energy, Vol. No. 18, Issue No. 9, ISSN No. ISSN: 1556-6560, Mar-2024(Impact Factor: 1.12)

18) Dr. J. Hemalatha, "Improved multiview biometric object detection for anti spoofng frauds", Multimedia Tools and Applications, Vol. No. 1, Issue No. 1, ISSN No. 1573-7721, Feb-2024(Impact Factor: 3.6)

19) Dr. P.S.R.Senthil Maharaj , "A complete overview of self-healing composites including its models in aeronautical systems", Polymer-Plastics Technology and Materials, Vol. No. 63, Issue No. 9, ISSN No. 2574-089X, Feb-2024(Impact Factor: 2.7)

20) Dr. P. Elamparithi, "Fuzzy Heuristics for Detecting and Preventing Black Hole Attack", The International Arab Journal of Information Technology, Vol. No. 21, Issue No. 1, ISSN No. 1683-3198, Jan-2024(Impact Factor: 1.2)

21) Mr. B.Jegatheeswaran , "Lateral Response of Pile Under Passive Loading Conditions in Horizontal and Sloped Grounds", Indian Geotechnical Journal, Vol. No. 54, Issue No. 1, ISSN No. 0971-9555, Jan-2024(Impact Factor: 1.4)

22) Dr. P.S.R.Senthil Maharaj , "PEEK-based 3D printing: a paradigm shift in implant revolution for healthcare", Polymer-Plastics Technology and Materials, Vol. No. 63, Issue No. 6, ISSN No. 2574-089X, Jan-2024(Impact Factor: 2.7)

23) Dr. K.Prabakaran, "Development of Ag/SrTiO3 and Ag/SrTiO3/GO nanocomposites with superior photocatalytic and electrochemical characteristics for the environmental remediation of industrial dye", Ceramics International, Vol. No. 50, Issue No. 2, ISSN No. 1873-3956, Jan-2024(Impact Factor: 5.1)

24) Dr. R.Selvabharathi, "Microstructure and corrosion resistance of 23Cr9Ni4Mo2Mn filler duplex stainless steel 2205 fabricated by wire arc additive manufacturing with subsequent severe shot peening and Ni58Cr20Fe5Mo10 plasma spray coating", MATERIALS TODAY COMMUNICATIONS, Vol. No. 37, Issue No. 107560, ISSN No. 2352-4928, Dec-2023(Impact Factor: 3.8)

25) Mr. MUTHU ESHWARAN R, "Multi-analytical investigation of the physical, chemical, morphological, tensile, and structural properties of Indian mulberry (Morinda tinctoria) bark fibers", Heliyon,, Vol. No. 9, Issue No. 11, ISSN No. ISSN 2405-8440, Nov-2023(Impact Factor: 4)

26) Dr. V. Vivek, "TOWARDS THE DEVELOPMENT OF OBSTACLE DETECTION IN RAILWAY TRACKS USING THERMAL IMAGING", NEURAL NETWORK WORLD, Vol. No. 33, Issue No. 5, ISSN No. 1210-0552, Nov-2023(Impact Factor: 1.30)

27) Dr. J. Hemalatha, "TOWARDS THE DEVELOPMENT OF OBSTACLE DETECTION IN RAILWAY TRACKS USING THERMAL IMAGING", Neural Network World, Vol. No. 5, Issue No. 1, ISSN No. 1210-0552, Nov-2023(Impact Factor: 1.30)

28) Dr. P.S.R.Senthil Maharaj , "Advancements and prospects of polymer-based hybrid composites for bone plate applications", Polymer-Plastics Technology and Materials, Vol. No. 63, Issue No. 1, ISSN No. 2574-089X, Nov-2023(Impact Factor: 2.7)

29) Dr. M.KALIRAJ, "Fabrication and Testing of Crop Waste Ceiba pentandra Shell Powder Reinforced Biodegradable Composite Films", ACS omega, Vol. No. 8, Issue No. 45, ISSN No. 2470-1343, Nov-2023(Impact Factor: 4.1)

30) Dr. PADMANABAN B, "Synthesis, In silico mapping for anti-cancer proviso, hardness studies of D-gluconic acid monohydrate crystals for usage in electronic, mechanical and biological sectors", Heliyon, Vol. No. 12, Issue No. 10, ISSN No. (2023) e20941, Oct-2023(Impact Factor: 4.0)

31) Dr. C. Senthil Kumar, "Performance evaluation of solar-combined boosting topology for EV battery charger using interval type-2 fuzzy controller", International Jounral of Electrical Engineering, Vol. No. 105, Issue No. 5, ISSN No. DOI:10.1007/s00202-023-02073-1, Oct-2023(Impact Factor: 1.8)

32) Dr. J. Dharmaraja, "Physico–chemical and extraction properties on alkali–treated Acacia pennata fiber", Environmental Research, Vol. No. 233, Issue No. 116415, ISSN No. 0013-9351, Sep-2023(Impact Factor: 8.43)

33) Dr. J. Hemalatha, "Towards improving the performance of blind image steganalyzer using third-order SPAM features and ensemble classifier", Journal of Information Security and Applications (Elsevier), Vol. No. 76, Issue No. 103541, ISSN No. 2214-2134, Aug-2023(Impact Factor: 5.6)

34) Dr. J. Hemalatha, "Edge detection using fast pixel based matching and contours mapping algorithms", PLOS ONE, Vol. No. 18, Issue No. 8, ISSN No. 1932-6203, Aug-2023(Impact Factor: 3.7)

35) Dr. M.P.Indira Devi , "Corrosion behaviour of additively manufactured Nitrided 17-4 PH Steels in different environments", Transaction of the Indian Institute of metals, Vol. No. 76, Issue No. 7, ISSN No. https://doi.org/10.1007/s12666-023-02884-7, Jul-2023(Impact Factor: 1.49)

36) Dr. R.Selvabharathi, "Mechanical and free vibrational analysis of silane functionalized aluminum stacked glass fiber/epoxy laminates", JOURNAL OF ADHESION, Vol. No. 8, Issue No. 6, ISSN No. 0021-8464, Jun-2023(Impact Factor: 2.46)

37) Dr. P.S.R.Senthil Maharaj , "An insight into the mechanical and tribological behavior of carbon-flax reinforced bioepoxy hybrid composite bone plates for orthopedic applications", Polymers and Polymer Composites, Sage., Vol. No. 31, Issue No. 1, ISSN No. 0967-3911, May-2023(Impact Factor: 1.8)

38) Dr. P.S.R.Senthil Maharaj , "BIO-PRINTING OF FEMUR MODEL: A BONE SUBSTITUTE FOR BIOMEDICAL RESEARCH", Materials and Technology, Vol. No. 57, Issue No. 3, ISSN No. 1580-2949, May-2023(Impact Factor: 0.7)

39) Mr. M.Karthikeyan, "A short review on SLM-processed Ti6Al4V composites", Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Vol. No. 0, Issue No. 0, ISSN No. https://doi.org/10.1177/09544089231169380, Apr-2023(Impact Factor: 1.82)

40) Dr. MANIKANDARAJA, "Effect of one-step dipping coating process on microstructure and tribology of polypropylene/graphene oxide/carbon nanotube nanocomposites", Iranian Polymer Journa, Vol. No. 32, Issue No. 32, ISSN No. 1026-1265, Mar-2023(Impact Factor: 3.1)

41) Dr. R.Selvabharathi, "Effect of one-step dipping coating process on microstructure and tribology of polypropylene/graphene oxide/carbon nanotube nanocomposites", Iranian Polymer Journal, Vol. No. 11, Issue No. 6, ISSN No. 1735-5265, Mar-2023(Impact Factor: 2.61)

42) Dr. R.Selvabharathi, "Enhancement on the low-pressure shot peened process of monotonic plastic deformation behaviors of Ni–4Cu–3Mo alloy/super austenite stainless steel dissimilar joints using laser beam welding", Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Vol. No. 22, Issue No. 8, ISSN No. 2041-3009, Mar-2023(Impact Factor: 1.82)

43) Dr. J. Dharmaraja, "Lignocellulosic biomass conversion via greener pretreatment methods towards biorefinery applications", Bioresource Technology, Vol. No. 369, Issue No. 0, ISSN No. 0960-8524, Feb-2023(Impact Factor: 11.89)

44) Dr. MANIKANDARAJA, "Novel Ternary Epoxy Resin Composites Obtained by Blending Graphene Oxide and Polypropylene Fillers: An Avenue for the Enhancement of Mechanical Characteristics", Journal of Inorganic and Organometallic Polymers and Materials, Vol. No. 33, Issue No. 1, ISSN No. 1574-1443, Nov-2022(Impact Factor: 3.51)

45) Dr. R.Selvabharathi, "Influence of Severe Double-Shot Peening and Plasma Spray Arc TiAlCr /AlCrSi Coating on Tribological Behaviour of Pure Aluminium Alloy", Journal of Inorganic and Organometallic Polymers and Materials -SPRINGER, Vol. No. 32, Issue No. 8, ISSN No. 1574-1443, Nov-2022(Impact Factor: 3.54)

46) Dr. J. Dharmaraja, "Lignocellulose biohydrogen towards net zero emission: A review on recent developments", Bioresource Technology, Vol. No. 364, Issue No. 0, ISSN No. 0960-8524, Nov-2022(Impact Factor: 11.89)

47) Dr. Jayahari Prabhu G, "“Investigation on Mechanical Behaviour of LM6 Aluminum Alloy hybrid composites processed using stir casting process” ", Advances in Materials Science and Engineering., Hindawi publisher., Vol. No. 20, Issue No. 22, ISSN No. 1155/2022/7539546, Oct-2022(Impact Factor: 2.09)

48) Mr. PAKIYA PRADEEP, "Extraction of transportation grade fuels from waste LDPE packaging polymers using catalytic pyrolysis", FUEL, Vol. No. 323, Issue No. 1, ISSN No. 00162361, Sep-2022(Impact Factor: 7.4)

49) Dr. Jayahari Prabhu G, "A Composite Medical Image Optimization Scheme using Honey Encryption and Ant-lion Algorithms for secured diagnostic systems”", International Journal of Pattern Recognition and Artificial Intelligence.,, Vol. No. 01, Issue No. 04, ISSN No. 1142/S0218001422400043, Aug-2022(Impact Factor: 1.26)

50) Dr. R B JEEN ROBERT, "Testing the Performance of Bat-Algorithm for Permutation Flow Shop Scheduling Problems with Makespan Minimization", Brazilian Archives of Biology and Technology, Vol. No. 65, Issue No. 1, ISSN No. 1678-4324, Aug-2022(Impact Factor: 1.18)

51) Dr. P.S.R.Senthil Maharaj , "Testing the Performance of Bat-Algorithm for Permutation Flow Shop Scheduling Problems with Makespan Minimization", Braz. arch. biol. technol., Vol. No. 65, Issue No. 1, ISSN No. 0094-243X, Aug-2022(Impact Factor: 1.2)

52) Dr. J. Dharmaraja, "Microalgae cultivation strategies using cost–effective nutrient sources: recent updates and progress towards biofuel production", Bioresource Technology, Vol. No. 361, Issue No. 0, ISSN No. 0960-8524, Aug-2022(Impact Factor: 11.89)

53) Dr. R B JEEN ROBERT, "Calcium phosphate conversion technique: A versatile route to develop corrosion resistant hydroxyapatite coating over Mg/Mg alloys based implants", Journal of Magnesium and Alloys, Vol. No. 1, Issue No. 1, ISSN No. 2213-9567, Jul-2022(Impact Factor: 11.81)

54) Dr. M.P.Indira Devi , "Feasibility of elastomeric composites as alternative materials for marine applications: A compendious review on their properties and opportunities", Journal of Engineering for the Maritime Environment, Vol. No. 4, Issue No. 2, ISSN No. doi.org/10.1177/14750902221095321, May-2022(Impact Factor: 1.38)

55) Dr. M.P.Indira Devi , "Extraction and Characterization of Natural Cellulosic Erythrina variegata Fiber for Biocomposites", Journal of Natural Fibers, Vol. No. 3, Issue No. 3, ISSN No. doi.org/10.1080/15440478.2022.2073502, May-2022(Impact Factor: 5.38)

56) Dr. Meby Selvaraj, "Thermal behavior analysis and mechanical characterization of friction stud welded AISI 304/AA6063 joints", Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. No. 44, Issue No. 114, ISSN No. 1-19, Mar-2022(Impact Factor: 2.36)

57) Mr. P.C.RAJARAJAN, "Influence of laser surface hardening on low cycle fatigue performance of homogeneous-structure super austenitic stainless sheets by laser beam welding", Optik , Vol. No. 252, Issue No. 168572, ISSN No. 168572, Feb-2022(Impact Factor: 2.9)

58) Dr. M.P.Indira Devi , "Nanocomposite cotton gauze cloth with in situ generated silver, copper and their binary metal nanoparticles by bioreduction method", Inorganic and Nano-Metal Chemistry, Vol. No. 12, Issue No. 3, ISSN No. doi.org/10.1080/24701556.2021.2025096, Jan-2022(Impact Factor: 1.71)

59) Dr. C. Karuppasamy , "Design of self Powered Internet of Medical Things Using Roboust Wolf Optimization Based PI Controller for Health Care Monitoring System", Journal of Medical Imaging and Health Informatics, Vol. No. 11, Issue No. 12, ISSN No. 2156-7018, Dec-2021(Impact Factor: 0.65)

60) Dr. Palraj K, "Predicting the Abnormality of Brain and Compute the Cognitive Power of Human Using Deep Learning Techniques using Functional Magnetic Resonance Images", Soft Computing (Springer), Vol. No. 25, Issue No. 1, ISSN No. 1432-7643, Nov-2021(Impact Factor: 3.64)

61) Dr. J. Hemalatha, "An Efficient Steganalysis of Medical Images by Using Deep Learning Based Discrete Scalable Alex Net Convolutionary Neural Networks Classifier", Journal of Medical Imaging and Health Informatics, Vol. No. 11, Issue No. 10, ISSN No. 2156-7018 , Oct-2021(Impact Factor: 0.65)

62) Dr. C. Senthil Kumar, "Stability Analysis and Region in control parameter space of thermal system with constant delays", Journal of Control Engineering and Applied Informatics, Vol. No. 23, Issue No. 3, ISSN No. 1454-8658, Oct-2021(Impact Factor: 0.97)

63) Dr. J. Sutha, "Wiener filter based deep convolutional network approach for classification of satellite images", Ambient Intelligence and Humanized Computing, Vol. No. 12, Issue No. 7, ISSN No. 1380-7501, Jul-2021(Impact Factor: 7.10)

64) Dr. S. Saravanan, "Performance investigation of doubly salient outer rotor switched reluctance motor using finite element analysis", Circuit World, Vol. No. 0, Issue No. 0, ISSN No. 0305-6120, Jul-2021(Impact Factor: 1.4)

65) Dr. J. Hemalatha, "Reversible Data Hiding Based on Varying Radix Numeral System", Computers, Materials & Continua, Vol. No. 69, Issue No. 1, ISSN No. 1546-2218, Jun-2021(Impact Factor: 3.78)

66) Dr. J. Hemalatha, "Multi-directional block based PVD and modulus function image steganography to avoid FOBP and IEP", Journal of Information Security and Applications (Elsevier), Vol. No. 58, Issue No. 102808, ISSN No. 2214-2126, Mar-2021(Impact Factor: 2.32)

67) Dr. J. Hemalatha, "An Efficient DenseNet‐Based Deep Learning Model for Malware Detection", Entropy, Vol. No. 23, Issue No. 344, ISSN No. 1099-4300, Mar-2021(Impact Factor: 2.49)

68) Dr. P. Elamparithi, "Trusted Sensing Model for Mobile Ad HoC Network Using Differential Evolution Algorithm", Information Technology and Control, Vol. No. 49, Issue No. 4, ISSN No. 1392-124X, Dec-2020(Impact Factor: 1.1)

69) Dr. R B JEEN ROBERT, "Optimization on friction and wear behaviour of Al-Si alloy reinforced with B4C particles by Powder Metallurgy using Taguchi design", Bulletin of the Polish Academy of Sciences-Technical Sciences, Vol. No. 68, Issue No. 1, ISSN No. 0239-7528, Dec-2020(Impact Factor: 1.52)

70) Dr. J. Sutha, "Deep Learning Algorithm for Breast Masses Classification in Mammograms, Deep Learning Algorithm for Breast Masses Classification in Mammograms", IET Image Processing, Vol. No. 14, Issue No. 12, ISSN No. 2860-2868, Oct-2020(Impact Factor: 2.00)

71) Dr. R. Pon Vengatesh , "Structural, Electrical, and Electrochemical Characterization of Li1.2Ni0.6−xMgxCo0.3O2 Cathode Materials for Application in Lithium-Ion Batteries", Journal of Electronic Material (The Minerals, Metals & Materials Society - A Joint publication of IEEE) , Vol. No. 49, Issue No. 11, ISSN No. 03615235, Oct-2020(Impact Factor: 1.94)

72) Dr. Meby Selvaraj, "Aerva lanata flowers extract as green corrosion inhibitor of low‑carbon steel in HCl solution: an in vitro study", Chemical Papers, Vol. No. 75, Issue No. 3, ISSN No. 2585-7290, Sep-2020(Impact Factor: 1.680)

73) Mr. BALAMURUGAN S, "Exploring the Properties of Pineapple Leaf Fiber and Prosopis Julifora Powder Reinforced Epoxy Composite", Journal of Natural Fibers - Taylor & Francis, Vol. No. 18, Issue No. 1, ISSN No. 1544-0478, Aug-2020(Impact Factor: 5.32)

74) Dr. J. Sutha, "A Survey on Machine Learning Algorithms for the Diagnosis of Breast Masses with Mammograms", Current Medical Imaging, Vol. No. 16, Issue No. 6, ISSN No. 1573-4056, Jun-2020(Impact Factor: 0.81)

75) Dr. J. Sutha, "A novel synthetic aperture radar image change detection systemusing radial basis function based deep convolutional neural network", Ambient Intelligence and Humanized Computing, Vol. No. 12, Issue No. 1, ISSN No. 1868-5137, May-2020(Impact Factor: 1.2)

76) Dr. R. Pon Vengatesh , "IoT based Energy Monitoring and Controlling of an Optimum Inclination Angle of the Solar Panels", IETE Journal of Research- Taylor & Francis, Vol. No. 1, Issue No. 1, ISSN No. 0974780X, Apr-2020(Impact Factor: 1.03)

77) Dr. R B JEEN ROBERT, "Enhancement in behavioral properties of cement mortar cubes admixed with reduced graphene oxide", Journal of Building Engineering, Vol. No. 6, Issue No. 1, ISSN No. 2352-7102, Mar-2020(Impact Factor: 7.11)

78) Dr. J. Sutha, "Novel deep learning framework for broadcasting abnormal events obtained from surveillance applications", Ambient Intelligence and Humanized Computing, Vol. No. 0, Issue No. 0, ISSN No. 1380-7501, Jan-2020(Impact Factor: 1.2)

79) Dr. J. Sutha, "Object based classification of high resolution remote sensing image using HRSVM-CNN classifier", European Journal of Remote Sensing, Vol. No. 53, Issue No. 1, ISSN No. 2279-72541380-7501, Oct-2019(Impact Factor: 1.2)

80) Dr. R. Pon Vengatesh , "An integrated Si-Ge based Thermo-electric Generator with Parabolic Trough Collector using Nano HTF for Effective Harvesting of Solar Radiant Energy", Springer Journal of Electronic Material (The Minerals, Metals & Materials Society - A Joint publication of IEEE), Vol. No. 48, Issue No. 12, ISSN No. 03615235, Sep-2019(Impact Factor: 1.68)

81) Dr. R B JEEN ROBERT, "A hybrid algorithm for multi-objective optimization of minimizing makespan and total flow time in permutation flow shop scheduling problems", Information Technology & Control, Vol. No. 8, Issue No. 6, ISSN No. 1392-124X, Sep-2019(Impact Factor: 1.11)

82) Dr. J. Sutha, "Performance Analysis of Two-Optimal Methods for Shortest Path Cost Analysis and Route Aggregation for Object Tracking Applications in WSN", Caribbean Journal of Science, Vol. No. 53, Issue No. 2, ISSN No. 0008-6452, Aug-2019(Impact Factor: 1.2)

83) Dr. R B JEEN ROBERT, "ZnO nanoparticles impregnated polymer composite as super-hydrophobic anti-corrosive coating for Aluminium-6061 alloy", Materials Research Express, Vol. No. 9, Issue No. 5, ISSN No. 2053-1591, Aug-2019(Impact Factor: 2.03)

84) Dr. J. Sutha, "Soft fuzzy computing to medical image compression in wireless sensor network-based tele medicine system", Multimedia Tools and Applications , Vol. No. 79, Issue No. 15, ISSN No. 1380-7509, May-2019(Impact Factor: 0)

85) Dr. R B JEEN ROBERT, "Multi-objective optimization using hybrid algorithm and its application to scheduling in flow-shops", Comptes rendus de l’Acade'mie bulgare des Sciences, Vol. No. 72, Issue No. 1, ISSN No. 1310-1311, Mar-2019(Impact Factor: 0.38)

86) Dr. J. Sutha, "An Efficient Encoder Architecture Design for Cognitive Radio Networks", Wireless Personal Communications , Vol. No. 103, Issue No. 4, ISSN No. 0929-6212, Mar-2018(Impact Factor: 1.2)

87) Dr. J. Sutha, "A New Energy Based Power Aware Routing Method For Manets ", Journal of Cluster Computing, Vol. No. 22, Issue No. 6, ISSN No. 1386-7857, Jan-2018(Impact Factor: 2.04)

88) Dr. R. Pon Vengatesh , "Investigation of High gain MIC power converter for multicrystal PV module employing fuzzy logic technique", Automatika – Journal for Control, Measurement, Electronics, Computing and Communications KoREMA and Taylor & Francis, Vol. No. 54, Issue No. 3, ISSN No. 00051144, Mar-2017(Impact Factor: 0.38)

89) Dr. R B JEEN ROBERT, "An Effective Genetic Algorithm for Flow Shop Scheduling Problems to Minimize Makespan", MECHANIKA, Vol. No. 4, Issue No. 1, ISSN No. 1392-1207, Mar-2017(Impact Factor: 0.6)

90) Dr. R. Pon Vengatesh , "Analysis of PV module connected in different configurations under uniform and non-uniform solar radiations", International Journal of Green Energy, Taylor & Francis, Vol. No. 13, Issue No. 14, ISSN No. 15435083, Jul-2016(Impact Factor: 1.8)

91) Dr. R. Pon Vengatesh , "Investigation of the effects of homogeneous and heterogeneous solar irradiations on multicrystal PV module under various configuration", IET Renewable Power Generation England, United Kingdom, Vol. No. 6, Issue No. 3, ISSN No. 17521416, Apr-2015(Impact Factor: 3.61)

92) Dr. R. Pon Vengatesh , "Investigation of Cloudless Solar Radiation with PV module Employing Matlab - simulink'", Journal of Solar Energy, Elsevier , Vol. No. 85, Issue No. 9, ISSN No. 0038092X, Nov-2011(Impact Factor: 4.81)

1) Dr. THENMOEZHI.N, "Efficient Image Fusion using Multiscale Decomposition and Absolute Maximum Fusion rule for CT and MRI brain Images", Internatioanl Journal of System Assurance Engineering and Management Systems, Vol. No. 22, Issue No. 4, ISSN No. online, Mar-2024(Impact Factor: 1.8)

2) Dr. J. Hemalatha, "Improving Rainfall Forecasting via Radial Basis Function and Deep Convolutional Neural Networks Integration", Journal of Climate Change (IOS PRESS) (ESCI), Vol. No. 9, Issue No. 4, ISSN No. 2395-7697, Dec-2023(Impact Factor: )

3) Mrs. R.Anandhalakshmi, "Utilizing rice husk ash as a bio-waste material in geopolymer composites with aluminium oxide.", Global NEST, Vol. No. 25, Issue No. 6, ISSN No. 1790-7632, Apr-2023(Impact Factor: 1.0)

4) Mr. T.Thirukumaran , "Utilizing Rice Husk Ash as a Bio-Waste Material in Geopolymer Composites with Aluminium oxide.", Global NEST Journal, Vol. No. 25, Issue No. 6, ISSN No. 1790-7632, Apr-2023(Impact Factor: 1)

5) Dr. S.Krishnapriya, "Utilizing Rice Husk Ash as a Bio Waste Material in Geopolymer Composites with Aluminium Oxide’", Global Nest Journal, Vol. No. 25, Issue No. 6, ISSN No. 1790-7632, Apr-2023(Impact Factor: 1)

6) Dr. THENMOEZHI.N, "Clustering based Image segmentation for optimal Image Fusion Using CT and MRI Images", International Journal of Modellling simulation and scientific computing, Vol. No. 15, Issue No. 2, ISSN No. 1793-9623, Feb-2023(Impact Factor: 0.93)

7) Dr. S.Krishnapriya, "MTBE Adsorption on Surface Modified Absorbent Kaolin-KoH - A Study on Kinetic Equilibrium and Surface Morphology", Global Nest Journal, Vol. No. 25, Issue No. 4, ISSN No. 1790-7632, Jan-2023(Impact Factor: 1)

8) Dr. S.Krishnapriya, "Extraction of Biodiesel from Wastewater using Microalgae Chlorella Vulgaris", Global Nest Journal, Vol. No. 25, Issue No. 1, ISSN No. 1790-7632, Nov-2022(Impact Factor: 1)

9) Dr. M.P.Indira Devi , "Tribiological analysis of Jute/coir Polyester composites filled with egg shell powder (ESP)or Nanoclay (NC)Using Grey Rational method, ", Fibers (EISSN 2079-6439,), Vol. No. 7, Issue No. 60, ISSN No. https://doi.org/10.3390/fib10070060, Oct-2022(Impact Factor: 3.9)

10) Dr. V. Vivek, "Stego Detection: Image Steganalysis Using a Novel Hidden Stego Visual Geometry Group–Based CNN Classification", Journal of Applied Security Research (Taylor and Francis), Vol. No. 1, Issue No. 1, ISSN No. 1936-1629, Aug-2022(Impact Factor: )

11) Dr. J. Hemalatha, "Stego Detection: Image Steganalysis Using a Novel Hidden Stego Visual Geometry Group–Based CNN Classification", Journal of Applied Security (ESCI) Research (Taylor & francis) (ESCI), Vol. No. 0, Issue No. 0, ISSN No. 1936-1629, Aug-2022(Impact Factor: )

12) Dr. J. Hemalatha, "Data Hiding Using PVD and Improving Security Using RSA", Journal of Applied Security Research (Taylor & Francis), Vol. No. 1, Issue No. 1, ISSN No. 1936-1629, Jul-2021(Impact Factor: )

13) Dr. R B JEEN ROBERT, "A Hybrid Al-gorithm for Minimizing Makespan in the Permutation Flow Shop Scheduling Environment", Asian Journal of Research in Social Sciences and Humanities, Vol. No. 6, Issue No. 9, ISSN No. 1239-1255, Sep-2016(Impact Factor: 0.1)